
                      PTGui Pro 9.1.6 (x86) 汉化版（去笑脸版）


【安装说明】

注册名:
Emily Latour
注册密钥:
QTZGRok6b9ybE#yszWAGRdZxM%ZP2r+Hszc%PZFk2mzXVmGF5RUjKsaNkW7v
B7CH5kKKTJzHY:uECAUH95X*hWJx+E4Gz4P5s/+JGgp+t6Wm%BacG2gCAQ==

    无需另行下载安装插件(AutoPano、Enblend 和 Smartblend)及全景图工具(Panorama Tools)，并已配置好插件及全景图工具的路径，安装完成即可直接使用。
    注意：如果没有按默认路径(C:\Program Files\PTGui)安装，需要重新指定插件及全景图工具的路径。具体操作方法：工具→选项...(Ctrl+P)→插件(全景图工具)，点击“浏览...”后在安装目录下指定相应的插件及全景图工具。

【软件简介】

    Helmut Dersch 的多功能全景制作工具的一个用户界面。Panorama Tools 目前功能最为强大的全景制作工具,但是它需要用户编写脚本命令才能工作。PTGui 通过为全景制作工具(Panorama Tools)提供可视化界面来实现对图像的拼接，从而创造出高质量的全景图象。

【版本更新信息】
•Version 9.1.6 (20 November 2012)


◦Fix: Mac: Close Window command (Cmd+W) could close a non-active window or cause PTGui to crash
◦Fix: Project Settings - Batch Builder Behaviour - Use EXIF data of the first image: this checkbox would always be cleared upon loading the project
◦Fix: 'Assertion failed' error when creating a layered photoshop file with one or more layers outside the visible area of the panorama
◦Removed the warning asking to enable pitch and roll optimization for all images if the project contains horizontal/vertical line control points. This is no longer required when using the new 'level in second pass' setting.


•Version 9.1.5 (2 November 2012)


◦Mac: Added Select All shortcut to Batch Stitcher. Batch Stitcher can now open all projects in a folder using Cmd+A.
◦Fix: Crash or sub-optimal optimization result while optimizing a project with hor/vert control points and 'Include in single pass'
◦Fix: PTGui would notify that a new version is available even though it was the latest version
◦Fix: Optimizer tab: 'Hor / Vert control points' listbox is now hidden when the Panorama Tools optimizer is used
◦Fix: During stitching the progress bar would hang in the 'Saving' phase
◦Fix: PTGui would give an error if a photoshop file was created with individual layers for only one layer
◦Fix: PTGui could crash during startup if the automatic update check found a new version
◦Fix: Mac: Error when opening a project: '... is not a floating point value'
◦Fix: Mac: Menu and keyboard shortcuts for Cut / Copy / Paste / Select All were not working in various places


•Version 9.1.4 (25 October 2012)


◦dcraw updated to version 9.16
◦PTGui Pro now supports layered Photoshop output for 32 bit HDR projects. Useful for manual retouching or deghosting
◦Batch Builder can now be configured to include only images with certain file extensions
◦Option to show or hide the mask in the Control Points tab
◦PTGui optimizer now supports two different methods for handling horizontal line / vertical line control points. 'Level in second pass' first optimizes the panorama using the regular control points and then does a separate leveling step using the line-type control points. This is the method that was always used in previous versions. 'Include in single pass' will do a single optimization pass using all control points. This is the method used by the Panotools optimizer. See the Help page for the Optimizer tab for details.
◦Align to Grid now gives an error message if the resulting panorama would be wider than 360 degrees or taller than 180 degrees.
◦Default setting for the maximum number of control points to generate for a project has been increased from 2500 to 8000
◦PTGui Viewer now supports Firefox in CSS 3D mode too (in case WebGL is not available)
◦PTGui Viewer: Removed the Full Screen option from the right-click context menu in Flash mode, since this is no longer supported by Flash player. Full screen mode is still accessible through the full screen button at the top right of the displayed panorama, or by double clicking.
◦Running Align Images for a 360 degree panorama now attempts to preserve the center of the panorama if the images were already roughly aligned. Previously it would choose a random center point.
◦PTGui for Mac now requires OS X 10.5 or later. Only one version is distributed for Intel 32 and 64 bit support on all OS versions.
◦Support for full screen mode on Mac: click the arrows at the top right of the window (requires OS X 10.7 or later)
◦If one of the source images contains a GPS Image Direction EXIF tag, PTGui will include the Image Direction tag in the created panorama (TIFF/JPEG output only)
◦Added sensor size data for new cameras
◦Fix: using horizontal line control points for a rectilinear output image did not work properly (since the optimization was in fact done in equirectangular space regardless of the output projection)
◦Fix: for certain panoramas the optimizer would give up early, resulting in higher than necessary control point errors
◦Fix: optimizer would fail to optimize certain projects if the initial alignment of the images was too far off
◦Fix: for 360 degree panoramas, the optimizer would not always keep orphaned images together with the panorama. This caused problems when using Align to Grid with 360 degree panoramas.
◦Fix: raw files from the Canon 5D mk III would be loaded with a purple tint (fixed in dcraw 9.16)
◦Fix: certain DNG files would be loaded incorrectly, with black border and vertical stripes (fixed in dcraw 9.16)
◦Fix: tooltips for the Control point table window were missing
◦Fix: Convert to Cubic would give 'unsupported file type' error when generating .exr ouput
◦Fix: When outputting individual layers, a black rectangle could be visible to the right or bottom of the warped image
◦Fix: Align Images could change the panorama size by 1 or 2 pixels even if Align Images Behaviour was set to not change the panorama size
◦Fix: When previewing a spherical panorama in QuickTime using the 'eye' button in the Panorama Editor, the generated preview could be limited in tilt such that the nadir and zenith were not visible. This happened if the width of the panorama editor was odd and thus not exactly a 2:1 equirectangular.
◦Fix: Mac Help files were not visible in OS 10.5
◦Fix: Due to a bug, stitching certain non-360 degree gigapixel panoramas became slower in version 9.1.1. The speed is now improved again.


•Version 9.1.3 (16 January 2012)


◦Fix: out of memory error could occur when saving large jpeg files on 32 bit Windows
◦Fix: parts of the panorama could be missing in the detail viewer (detail viewer would show transparency checkerboard pattern)
◦Fix: Area selection in Control Points tab (using Shift dragging) allowed the selection rectangle to be outside the image bounds, resulting in several problems
◦PTGui can now save JPEG files up to 65500 x 65500 pixels. Previously this was limited to 25000 pixels width and height. Please note that many applications (including Photoshop) cannot read such large jpeg files, claiming that the file is corrupt.
◦Creating progressive JPEG files is no longer supported


•Version 9.1.2 (21 November 2011)


◦Fix: Viewpoint corrected images would be partially cut off


•Version 9.1.1 (17 November 2011)


◦Faster stitching of viewpoint corrected images. Previously PTGui would need to warp all viewpoint corrected images at the full panorama size. The current version is able to determine which part of the panorama is actually covered by each source image and will only render the visible area.
◦PTGui Pro: New checkbox Project Settings - Batch Builder behaviour - Use EXIF data of the first image to set the lens parameters. For templates used by the Batch Builder this setting controls whether the lens settings are taken from the template or from the EXIF data.
◦New dcraw version (fixes a problem with Sony .arw files)
◦PTGui Viewer: new javascript method viewer.showInLightbox(). This can be used instead of viewer.embed(); it will pop up the panorama as an overlay of the current web page. View the source of PTGuiViewer.js for details.
◦PTGui Viewer: viewer.embed() can now be passed either an HTMLElement (e.g. as returned by getElementById()) or a string containing the ID of an element (previously only an id string was allowed).
◦Fix: Image in Control Points / Crop / Mask tabs could be wrongly rotated after switching between images and zoom levels
◦Fix: Delete Worst Control Points would generate two Undo entries instead of one
◦Fix: Pattern Matching (in Control Points window) would take a long time for very large source images
◦Fix: Control points generated by Auto Add (in Control Points window) would be off by 1 pixel
◦Fix: After adding horizontal/vertical line control points, the optimizer would not optimize yaw/pitch/roll of the first image
◦Fix: When using 'Fit Panorama' on source images rotated approximately 45 degrees, the top and bottom part of the panorama would be cut off. Same problem occurs after the panorama has been set up through Align Images.
◦Fix: Detail Viewer in 'Drag to Move' mode could move beyond the zenith and nadir (resulting in up side down view)
◦Fix: Mac: permissions problem (could not create folder) when installing a company license key for all users on the computer in OS 10.7


•Version 9.1 (29 September 2011)

Major update! For the most important changes see What's new in PTGui 9.1?


◦New: Project->Align to Grid. This sets up the panorama as an array of rows and columns. Particularly useful when shooting gigapixel panoramas with robotic panoramic heads: often some of the images contain only blue sky and cannot be positioned automatically.
◦Optimizer now tries to keep 'orphaned' images (i.e. images without control points) together with neighbouring images. Useful in combination with Align to Grid, to keep the blue sky images with the rest of the panorama even after optimizing.
◦Improved automatic control point generator for fisheye images: will find more control points and the control points are better spread out over the entire overlap area
◦Align Images now by default uses the Heavy+Lens Shift optimization. This results in better alignment in particular for wide angle lenses, which are often not mounted exactly in front of the center of the sensor. Falls back to Heavy or Medium if the lens parameters cannot be estimated accurately.
◦A rectangular area can be selected in the Control Points tab using Shift+drag. This selects all control points in that area. Use the Delete key to remove control points in the selected area.
◦Generate control points in a certain area: select a rectangular area in an image by Shift+dragging, then right-click and select 'Generate Control Points Here'.
◦New 'ghost' mouse pointers: if the mouse is moved over a certain part of an image in e.g. the Control Points tab, the corresponding point is highlighted in the Panorama Editor, Detail Viewer and all other windows
◦Image numbers can now be shown in the Panorama Editor and Detail Viewer.
◦Context menu in the Panorama Editor and Detail Viewer: right-click anywhere in the panorama and a menu pops up. From this menu you can jump to the corresponding point in the Mask or Control Points tab. Images can be included/excluded through this menu as well.
◦New button 'Remove Excluded Images' (below the 'Include Images' list in the Advanced section of the Create Panorama tab). This deletes those images from the project for which the Include checkbox is not set.
◦Feathering can now be controlled for the PTGui Blender using the Feather slider in the Advanced section of Create Panorama. When set to 'sharp' a hard transition is between images is created, 'soft' creates a more gradual transition. The behaviour of the previous versions corresponds to the middle of the slider.
◦Publish to Website: if Resolution is set to Automatic the output is now limited to 60 megapixels. Larger output is possible by overriding the automatic setting but such a panorama may not be displayed reliably on every computer.
◦Context menu in Source Images tab: added 'Clear Mask' option
◦Context menu in Mask tab: added options for copying/pasting/saving/loading/clearing masks
◦Mask tab: added copy/paste/load/save/clear buttons to the toolbars below the images
◦New default file naming option: 'prefix source image folder name'. When used (e.g.) in the batch builder, the project files get the name of the folder containing the source images.
◦Mask tab: new split view to show two images simultaneously
◦Detail viewer now offers two modes for navigation: 'drag and hold' and 'drag to move'
◦New import function for Papywizard data files (in File -> Import menu). Only the yaw and pitch angles are imported, other settings are assumed to be taken from the EXIF data
◦Added sensor size data for new cameras
◦Bundled dcraw is updated to version 9.10
◦PTGui Viewer: can now add custom parameters to the Flash <object> tag, for example to add wmode=transparent. See documentation inside PTGuiViewer.js.
◦Paste Mask now merges the pasted mask with the existing mask. Previously pasting replaced the existing mask completely. The former behaviour can still be replicated by pressing the Clear Mask button before pasting.
◦Mac: if PTGui is executed straight from the install disk image, it will (after user confirmation) install itself into the Applications folder of the computer.
◦Fix: PTGui refused to write Photoshop .psb files wider or taller than 300,000 pixels, aborting with an error message after stitching. The current version will only give a warning message before stitching.
◦Fix: Undo did not work correctly when rotating an image in the Control Points/Mask/Crop tabs
◦Fix: Publish To Website: selecting 'Use custom template' but not giving a template file name now gives a more descriptive error message
◦Fix: mac: unavailable menu items were never greyed out
◦Fix: Windows: after restarting PTGui popup windows (panorama editor, detail viewer) could be placed invisibly behind the taskbar
◦Fix: Mac: when editing a value in the Image Parameters tab and switching to another tab, the edited value was not saved or applied.
◦Fix: Mac OS 10.4 version of PTGui: attempting to resize columns and rows in the Image Parameters tab and Source Images tab would fail with an error
◦Fix: Convert to Cubic: 16 bit TIFF source file is now converted into 16 bit output (previously 8 bit output)
◦'Correct' function is removed from the Source Images tab, since pano12 library is no longer supported
◦From this version, PowerPC macs are no longer supported. Support for OS X 10.4 will be dropped in the near future as well.



汉化作者：canniness
电子信箱：canniness@tom.com
汉化版更新地址：http://forum.xitek.com/showthread.php?threadid=425467

2013-1-12